Netgear extender wn3000rp setup

A Complete Guide on Netgear Extender wn3000rp Setup

Are you facing issues while using the router? Is your router not sending wi-fi signals to every rea of the house or workplace?s Well, then you must get an extender to fix this issues.

It is very common to have dead spots at your home or any massive place. Usually, because of obstructions like walls, furniture, doors etch result in spots or zones that do not receive proper signals.

And as a result the problem of weak wi-fi arrises. If you are facing a similar issue then getting Netgear Extender wn3000rp Setup is the best option for you.


Getting Netgear extender can help in resolving most of the wi-fi related issues. So, basically, what does an extender do? How can you set up Netgear extender wn3000rp? Here in this blog, we have covered it all.

Steps that can help you in Netgear Extender wn3000rp Setup

 So, you have decided to get a Netgear wifi extender to boost the signal of your existing wifi network. But there are a couple of things that you must know about the extender.

The Netgear extender wn3000rp helps in boosting the wi-fi signals of the router to every corner of your space. The router connects with the extender and receives the wifi signals.


The signals are boosted by the extender through access points reach every corner of the space.

For this, you need to follow the basic steps that can help in completing the setup. Here we have discussed in detail the steps that you need to follow to complete the set up for the Netgear extender wn3000rp.

Netgear Extender wn3000rp Setup Using the WPS Button

The first thing that you need to do is to look for the WPS button on the router as well as the extender. Once you have found out here are the things to note down.

⦁  Plug in the Netgear extender into the power source and turn it on.


⦁  Make sure to place the Netgear extender somewhere in the middle where it receives wi-fi signals as well as is closer to the device that needs to be connected. Once the connection is established you can reposition the extender.

⦁  Then press the WPS button on the  router.

⦁  After a minute press the WPS button on the router as well.

⦁  Check and connect the wireless device. See if they are connected or not.

If you are unable to complete the wireless device setup then you must get in touch with the Netgear technical support team for help.

Netgear extender wn3000rp Setup using the Web Browser


The first thing that you need to know is the password details of the router as you will require it while connecting the router and the extender. If you do not remember the password then you can get in touch with the Netgear support team to know the details for reset.

⦁  Turn on the extender by plugging it in the power source and then switch it on.

⦁  Wait for a few minutes and then wait for the extender to turn on.

⦁  Now, open Netgear ext. Once the extender connects to the PC and the extender the indicator LED light will turn stable.

⦁  Then connect the router and the extender and open a web browser and type mywifiext. Here you will see Netgear wizard complete the setup.

⦁  Now, you will find out the list of options from where you can choose the network connection that you want to extend.  You need to select the network and then enter the password to connect.

⦁  These steps will connect the extender and the router.

If you are unable to complete Netgear extender wn3000rp Setup then you may have to reset the extender.

However, resetting the device will completely wipe the data and settings and restore the default settings so it must be considered as the last step when nothing else works. You can get in touch with the support team to reset the device.

Here in this blog, we have covered in detail the steps that you can follow to Netgear extender wn3000rp Setup. But, sometimes you may not be able to complete the setup because of several reasons.


This is when you can get in touch with the Netgear support team for help and guidance

Leave a Comment

Your email address will not be published. Required fields are marked *